ST7MC2N6T3 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST7MC2N6T3

8-bit MCU with nested interrupts, Flash, 10-bit ADC, brushless motor control, five timers, SPI, LINSCI™

STMicroelectronics 

ST7MC1xx/ST7MC2xx

WINDOW WATCHDOG (Cont’d)

10.1.9 Interrupts

None.

10.1.10 Register Description

CONTROL REGISTER (WDGCR)

Read / Write

Reset Value: 0111 1111 (7Fh)

7

0

WDGA T6 T5 T4 T3 T2 T1 T0

Bit 7 = WDGA Activation bit.

This bit is set by software and only cleared by

hardware after a reset. When WDGA = 1, the

watchdog can generate a reset.

0: Watchdog disabled

1: Watchdog enabled

Note: This bit is not used if the hardware watch-

dog option is enabled by option byte.

Bits 6:0 = T[6:0] 7-bit counter (MSB to LSB).

These bits contain the value of the watchdog

counter. It is decremented every 16384 fOSC2 cy-

cles (approx.). A reset is produced when it rolls

over from 40h to 3Fh (T6 becomes cleared).

WINDOW REGISTER (WDGWR)

Read/Write

Reset Value: 0111 1111 (7Fh)

7

0

-

W6 W5 W4 W3 W2 W1 W0

Bit 7 = Reserved

Bits 6:0 = W[6:0] 7-bit window value

These bits contain the window value to be com-

pared to the downcounter.

65/309

1

Share Link: