STFPC320 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STFPC320

Front panel controller/driver with standby power management and real-time clock

STMicroelectronics 

STFPC320

Commands

Note:

Table 11. Data read 2 command. b5 b4: 11

10

Reserved

11

Read RTC Registers

(see Section 11.1: RTC display data read on page 46)

On power application, the normal display mode and address increment mode is set with the

default display memory address set to 10H.

In the auto increment address mode, the address command is sent only once followed by

the data bytes.

This command is seldom used. For writing to memory (normal or RTC), the address setting

command is sufficient.

37/78

Share Link: