Electrical characteristics
Table 17. Electrical characteristics (continued)
Symbol
Parameter
Test condition
THL
Ovl
TXoff
G24
G42
G24f
G24f
V2Wp
V2Wp
V4Wp
V4Wp
Thd
VTTX
Trans-hybrid loss
300 to 3400 Hz
20Log|VRX/VTX|
Active N. P., RL = 600 Ω (*)
2W overload level
At line terminals on ref. imped.
Active N. P., RL = 600 Ω (*)
TX output offset
Active N. P., RL = 600 Ω (*)
Transmit gain abs.
0 dBm @ 1020 Hz
Active N. P., RL = 600 Ω (*)
Receive gain abs.
0 dBm @ 1020 Hz
Active N. P., RL = 600Ω (*)
Rel. 1020 Hz; 0 dBm
TX gain variation vs. frequency
300 to 3400 Hz
Active N. P., RL = 600 Ω (*)
RX gain variation vs. freq.
Rel. 1020 Hz; 0dBm
300 to 3400 Hz
Active N. P., RL = 600 Ω (*)
Psophometric filtered
Idle channel noise at line 0dB gain
set
Active N. P., RL = 600 Ω (*)
Tamb = 0 to +85 °C
Psophometric filtered
Idle channel noise at line 0dB gain
set
Active N. P., RL = 600 Ω (*)
Tamb = -40 to +85 °C
Psophometric filtered
Idle channel noise at line 0dB gain
set
Active N. P., RL = 600 Ω (*)
Tamb = 0 to +85 °C
Psophometric filtered
Idle channel noise at line 0dB gain
set
Active N. P., RL = 600 Ω (*)
Tamb = -40 to +85 °C
Total harmonic distortion
Active N. P., RL = 600 Ω (*)
Metering pulse level on line
Active - TTX; Gain Set = 1
Zl = 200 Ω fttx = 12 kHz
CLKfreq CLK operating range
(*) RL: Line resistance
Ring
Vring Line voltage
RING D2 toggling @ fr = 25 Hz
Load = 3REN
Crest Factor = 1.25
1REN = 1800 Ω + 1.0 µF
Tamb = 0 to +85 °C
STLC3075
Min. Typ. Max. Unit
30
dB
3.2
dBm
-250
250 mV
-6.4
-5.6 dB
-0.4
0.4 dB
-0.12
0.12 dB
-0.12
0.12 dB
-73 -68 dBmp
-68
dBmp
-75 -70 dBmp
-75
dBmp
-44 dB
260 340
mVr
ms
-10% 125 10% kHz
45 49
Vrms
26/36