XRT75L03DIV View Datasheet(PDF) - Exar Corporation

Part Name

Description

Manufacturer

XRT75L03DIV

THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER

Exar Corporation 

XRT75L03D

áç

REV. 1.0.0 THREE CHANNEL E3/DS3/STS-1 LINE INTERFACE UNIT WITH SONET DESYNCHRONIZER

BIT NUMBER

NAME

1

Change of LOS

Condition Interrupt

Enable

0

Change of DMO

Condition Interrupt

Enable

TYPE

R/W

R/W

DEFAULT

VALUE

DESCRIPTION

0

Change of the Receive LOS (Loss of Signal) Defect

Condition Interrupt Enable - Ch 0:

This READ/WRITE bit-field is used to either enable or dis-

able the Change of the Receive LOS Defect Condition

Interrupt. If the user enables this interrupt, then the

XRT75L03D will generate an interrupt any time any of the

following events occur.

• Whenever the Receive Section (within Channel 0)

declares the LOS Defect Condition.

• Whenever the Receive Section (within Channel 0) clears

the LOS Defect condition.

0 - Disables the Change in the LOS Defect Condition Inter-

rupt.

1 - Enables the Change in the LOS Defect Condition Inter-

rupt.

0

Change of Transmit DMO (Drive Monitor Output) Con-

dition Interrupt Enable - Ch 0:

This READ/WRITE bit-field is used to either enable or dis-

able the Change of Transmit DMO Condition Interrupt. If

the user enables this interrupt, then the XRT75L03D will

generate an interrupt any time any of the following events

occur.

• Whenever the Transmit Section toggles the DMO output

pin (or bit-field) to "1".

• Whenever the Transmit Section toggles the DMO output

pin (or bit-field) to "0".

0 - Disables the Change in the DMO Condition Interrupt.

1 - Enables the Change in the DMO Condition Interrupt.

67

Share Link: