MC9S08SH8CSC View Datasheet(PDF) - Freescale Semiconductor

Part Name

Description

Manufacturer

MC9S08SH8CSC

HCS08 Microcontrollers

Freescale Semiconductor 

Chapter 17 Development Support

17.2.3 BDC Commands

BDC commands are sent serially from a host computer to the BKGD pin of the target HCS08 MCU. All

commands and data are sent MSB-first using a custom BDC communications protocol. Active background

mode commands require that the target MCU is currently in the active background mode while

non-intrusive commands may be issued at any time whether the target MCU is in active background mode

or running a user application program.

Table 17-1 shows all HCS08 BDC commands, a shorthand description of their coding structure, and the

meaning of each command.

Coding Structure Nomenclature

This nomenclature is used in Table 17-1 to describe the coding structure of the BDC commands.

Commands begin with an 8-bit hexadecimal command code in the host-to-target

direction (most significant bit first)

/ = separates parts of the command

d = delay 16 target BDC clock cycles

AAAA = a 16-bit address in the host-to-target direction

RD = 8 bits of read data in the target-to-host direction

WD = 8 bits of write data in the host-to-target direction

RD16 = 16 bits of read data in the target-to-host direction

WD16 = 16 bits of write data in the host-to-target direction

SS = the contents of BDCSCR in the target-to-host direction (STATUS)

CC = 8 bits of write data for BDCSCR in the host-to-target direction (CONTROL)

RBKP = 16 bits of read data in the target-to-host direction (from BDCBKPT breakpoint

register)

WBKP = 16 bits of write data in the host-to-target direction (for BDCBKPT breakpoint register)

MC9S08SH8 MCU Series Data Sheet, Rev. 3

274

Freescale Semiconductor

Share Link: