MC9S08SH8CSC View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
Manufacturer
MC9S08SH8CSC Datasheet PDF : 341 Pages
| |||
Appendix A Electrical Characteristics
1 Typical values are based on characterization data at 25°C. See Figure A-5 through Figure A-7 for typical curves
across voltage/temperature.
2 Max values in this column apply for the full operating temperature range of the device unless otherwise noted.
3 All modules except ADC active, ICS configured for FBE, and does not include any dc loads on port pins.
4 All modules except ADC active, ICS configured for FEI, and does not include any dc loads on port pins.
5 Stop currents are tested in production for 25°C on all parts. Tests at other temperatures depend upon the part
number suffix and maturity of the product. Freescale may eliminate a test insertion at a particular temperature
from the production test flow once sufficient data has been collected and is approved.
6 Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher
current wait mode.
7 Values given under the following conditions: low range operation (RANGE = 0) with a 32.768kHz crystal and low
power mode (HGO = 0).
10
FEI
FBELP
8
6
4
2
0
01 2 4
8
fbus (MHz)
16
20
Figure A-5. Typical Run IDD vs. Bus Frequency (VDD = 5V)
MC9S08SH8 MCU Series Data Sheet, Rev. 3
Freescale Semiconductor
299
Share Link: 