PIC32MX230F128L-I/PF View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC32MX230F128L-I/PF

32-bit Microcontrollers (up to 512 KB Flash and 64 KB SRAM) with Audio/Graphics/Touch (HMI), CAN, USB, and Advanced Analog

Microchip Technology 

PIC32MX1XX/2XX/5XX 64/100-PIN FAMILY

32.0 50 MHz ELECTRICAL CHARACTERISTICS

This section provides an overview of the PIC32MX1XX/2XX/5XX 64/100-pin Family electrical characteristics for devices

operating at 50 MHz.

The specifications for 50 MHz are identical to those shown in Section 31.0 “40 MHz Electrical Characteristics”, with

the exception of the parameters listed in this chapter.

Parameters in this chapter begin with the letter “M”, which denotes 50 MHz operation. For example, parameter DC29a

in Section 31.0 “40 MHz Electrical Characteristics”, is the up to 40 MHz operation equivalent for MDC29a.

Absolute maximum ratings for the PIC32MX1XX/2XX/5XX 64/100-pin Family 50 MHz devices are listed below.

Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation of

the device at these or any other conditions, above the parameters indicated in the operation listings of this specification,

is not implied.

Absolute Maximum Ratings

(See Note 1)

Ambient temperature under bias.............................................................................................................. .-40°C to +85°C

Storage temperature .............................................................................................................................. -65°C to +150°C

Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V

Voltage on any pin that is not 5V tolerant, with respect to VSS (Note 3)......................................... -0.3V to (VDD + 0.3V)

Voltage on any 5V tolerant pin with respect to VSS when VDD  2.3V (Note 3)........................................ -0.3V to +5.5V

Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.3V (Note 3)........................................ -0.3V to +3.6V

Voltage on D+ or D- pin with respect to VUSB3V3 .................................................................... -0.3V to (VUSB3V3 + 0.3V)

Voltage on VBUS with respect to VSS ....................................................................................................... -0.3V to +5.5V

Maximum current out of VSS pin(s) .......................................................................................................................300 mA

Maximum current into VDD pin(s) (Note 2)............................................................................................................300 mA

Maximum output current sunk by any I/O pin..........................................................................................................15 mA

Maximum output current sourced by any I/O pin ....................................................................................................15 mA

Maximum current sunk by all ports .......................................................................................................................200 mA

Maximum current sourced by all ports (Note 2)....................................................................................................200 mA

Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions,

above those indicated in the operation listings of this specification, is not implied. Exposure to maximum

rating conditions for extended periods may affect device reliability.

2: Maximum allowable current is a function of device maximum power dissipation (see Table 32-2).

3: See the “Device Pin Tables” section for the 5V tolerant pins.

 2014-2017 Microchip Technology Inc.

DS60001290E-page 353

Share Link: