STLC5460 View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
STLC5460 Datasheet PDF : 54 Pages
| |||
STLC5460
N0 = 1
Multiplex number : 1
TS0/4
Time Slot Number : 0 to 31
If N1 = 1
Insertion Registers are selected.
N0 = 0 and TS0/4 = 0. A Insertion Register 40 (H) is the source
N0 = 1 and TS0/4 = 1. B Insertion Register 41(H) is the source .
Second case : CM = 0 (Bit of Command Register)
The auxiliary memory is selected.
If channel is Monitor channel (see Destination Register), the contents of Source Register are data :
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
M8
M7
M6
M5
M4
M3
M2
M1
It is proposed to initialise at FF, before starting normal operation using initialisation register
T1 = 0 and T0 = 1.
M8 will be transmitted first.
If channel selected by DestinationRegister is Command/Indicate channels, the mean of bits of Source
Register are :
- For TX C/I with R/W = 0 Write auxiliary memory.
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
-
-
C6
C5
C4
C3
C2
C1
It is proposed to initialise at FF, before starting normal operation using initialisation register
T1 = 0 and T0 = 1.
C1/C6
Primitive to transmit : C6 and C5 bits are taken into account depending
on CI4M1 and CI4M0 bits of MCONF Register.C6 (or C4) will be
transmitted first.
- For TX C/I with R/W = 1 Read auxiliary memory.
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
PT1
PT0
C6
C5
C4
C3
C2
C1
PT 1/0
Status of Transmitting primitive.
PT1
PT0
Status
0
0
Primitive has not been transmitted yet
0
1
Primitive has been transmitted once
1
0
Primitive has been transmitted twice
1
1
Primitive has been transmitted more than twice.
C6 to C1
Primitive being transmitted.
For RX C/I with R/W = 0, write auxiliary memory. This Source Register is not taken into account.
For RX C/I with R/W = 1, read auxiliary memory.
SR7
SR6
SR5
SR4
SR3
SR2
SR1
SR0
OVR
PR
C6
C5
C4
C3
C2
C1
24/54
Share Link: 