STM8S207C8T3TR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8S207C8T3TR

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash, integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

STMicroelectronics 

Revision history

14 Revision history

STM8S207xx, STM8S208xx

Table 58. Document revision history

Date

Revision

Changes

23-May-2008

1

Initial release.

05-Jun-2008

Added part numbers on page 1 and in Table 2 on page 11.

2

Updated Section 4: Product overview.

Updated Section 10: Electrical characteristics.

22-Jun-2008

3

Added part numbers on page 1 and in Table 2 on page 11.

12-Aug-2008

Added 32 pin device pinout and ordering information.

Updated UBC option description in Table 13 on page 47.

4

USART renamed UART1, LINUART renamed UART3.

Max. ADC frequency increased to 6 MHz.

20-Oct-2008

Removed STM8S207K4 part number.

Removed LQFP64 14 x 14 mm package.

Added medium and high density Flash memory categories.

5

Added Section 6: Memory and register map on page 33.

Replaced beCAN3 by beCAN in Section 4.14.5: beCAN.

Updated Section 10: Electrical characteristics on page 51.

Updated LQFP44 (Figure 47 and Table 55), and LQFP32 outline and

mechanical data (Figure 48, and Table 56).

08-Dec-2008

Changed VDD minimum value from 3.0 to 2.95 V.

6

Updated number of High Sink I/Os in pinout.

Removed FLASH _NFPR and FLASH _FPR registers in Table 9:

General hardware register map.

30-Jan-2009

Removed preliminary status.

Removed VQFN32 package.

7

Added STM8S207C6, STM8S207S6.

Updated external interrupts in Table 2 on page 11.

Updated Section 10: Electrical characteristics.

10-Jul-2009

Document status changed from “preliminary data” to “datasheet”.

Added LQFP64 14 x 14 mm package.

Added STM8S207M8, STM8S207SB, STM8S208R8, STM8S208R6,

STM8S208C8, and STM8S208C6, STM8S208SB, STM8S208S8,

and STM8S208S6.

Replaced “CAN” with “beCAN”.

8

Added Table 3 to Section 4.5: Clock controller.

Updated Section 4.8: Auto wakeup counter.

Added beCAN peripheral (impacting Table 1 and Figure 6).

Added footnote about CAN_RX/TX to pinout figures 3, 4, and 6.

Table 6: Removed ‘X’ from wpu column of I2C pins (no wpu

available).

Added Table 11: Interrupt mapping.

100/103

Doc ID 14733 Rev 12

Share Link: