MCP795W22T-I/SL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
MCP795W22T-I/SL Datasheet PDF : 54 Pages
| |||
MCP795W1X/MCP795W2X
FIGURE 10-2:
WRITE SEQUENCE
CS
SCK
SI
SO
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Instruction
Address Byte
Data Byte
0 0 0 1 0 0 1 0 A7 6 5 4 3 2 1 A0 7 6 5 4 3 2 1 0
High-Impedance
10.1.4 WRITE TO THE UNLOCK REGISTER
The MCP795WXX contains a protected area of 64 bits
that can be used to hold a unique ID, such as a serial
number or MAC address code. To gain write access to
these locations, a specific sequence is required. Any
deviation from this sequence will reset the lock on
these locations. Once these locations have been
unlocked they have to be written to in the next
command by issuing the correct command. A write to
a different location will lock the ID locations and clear
the WEL bit.
FIGURE 10-3:
UNLOCK SEQUENCE
The following is a list of strict conditions which have to
be followed before the unique locations can be written
to:
• EEWREN instruction successfully executed
• UNLOCK 0x55 instruction successfully executed
• UNLOCK 0xAA instruction successfully executed
To issue each UNLOCK instruction the Unlock
command is sent followed by 0x55. Then in a separate
command the Unlock command is issued followed by
0xAA. It is a requirement that each command be
separate, that is CS must toggle between each
command.
Information on how to read and write the ID locations
is detailed in Section 9.1.6, Unique ID Locations.
CS
SCK
SI
SO
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Instruction
Data
0 00 1 0 10 0 7 6 5 4 3 2 1 0
High-Impedance
2011-2012 Microchip Technology Inc.
Preliminary
DS22280C-page 39
Share Link: 