DSPIC33FJ32MC304-I/SP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

DSPIC33FJ32MC304-I/SP

16-bit Digital Signal Controllers (up to 128 KB Flash and 16K SRAM) with Motor Control PWM and Advanced Analog

Microchip Technology 

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04

TABLE 31-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ TA ≤ + 85°C for Industrial

-40°C ≤ TA ≤ +125°C for Extended

Parameter

No.

Typical(1)

Max

Units

Conditions

Power-Down Current (IPD)(2)

DC60d

24

68

μA

-40°C

DC60a

DC60b

28

87

124

292

μA

+25°C

3.3V Base Power-Down Current(3,4)

μA

+85°C

DC60c

350

1000

μA

+125°C

DC61d

8

13

μA

-40°C

DC61a

DC61b

10

12

15

20

μA

μA

+25°C

+85°C

3.3V

Watchdog Timer Current:

ΔIWDT(3,5)

DC61c

13

25

μA

+125°C

Note 1: IPD (Sleep) current is measured as follows:

• CPU core is off, oscillator is configured in EC mode and external clock active, OSC1 is driven with

external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)

• CLKO is configured as an I/O input pin in the Configuration word

• All I/O pins are configured as inputs and pulled to VSS

• MCLR = VDD, WDT and FSCM are disabled, all peripheral modules are disabled (PMDx bits are all

‘1’s)

• RTCC is disabled

• JTAG is disabled

2: Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.

3: The Watchdog Timer Current is the additional current consumed when the WDT module is enabled. This

current should be added to the base IPD current.

4: These currents are measured on the device containing the most memory in this family.

5: These parameters are characterized, but are not tested in manufacturing.

DS70291G-page 362

© 2007-2012 Microchip Technology Inc.

Share Link: