STM32L151VCT7DTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32L151VCT7DTR

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics 

STM32L151xC STM32L152xC

Revision History

Date

12-Nov-2013

Table 75. Document revision history (continued)

Revision

Changes

Updated Section 3.15: Touch sensing.

Added VDD= 1.71 to 1.8 V operating power supply range in Table 4:

Functionalities depending on the working mode (from Run/active down

to standby)

Renamed "I/O Level" to "I/O structure" in Table 9: STM32L15xxC pin

definitions, added the I/O structure for PC14, PC15, PC3, PH0, PH1,

PA3, PA4, PA5, PB0, PE7, PE8, PE9, PE10, NRST and BOOT0

Updated Table 10: Voltage characteristics added row

Updated Table 11: Current characteristics replaced with the one inside

STM32L15xxBxxA datasheet.

Updated Table 13: General operating conditions, footnote and added

row.

Updated Table 15: Embedded internal reference voltage calibration

values and moved inside Section 6.3.3: Embedded internal reference

voltage

Updated Section 6.3.4: Supply current characteristics.

Updated Table 19: Current consumption in Run mode, code with data

processing running from Flash.

Updated Table 22: Current consumption in Run mode, code with data

processing running from RAM.

Created Section 6.3.5: Wakeup time from low-power mode..

Updated Table 38: High-speed external user clock characteristics.

Moved Figure 12: High-speed external clock source AC timing diagram

5

after Table 38: High-speed external user clock characteristics.

Updated Table 40: HSE oscillator characteristics.

Updated Section 6.3.12: Electrical sensitivity characteristics (title).

Updated Section 6.3.13: I/O current injection characteristics.

Updated Table 61: I/O current injection susceptibility and added

footnote.

Updated Table 63: I/O static characteristics

Updated Section 6.3.15: NRST pin characteristics.

Updated Table 77: ADC characteristics.

Added footnote(5) and (6) in Table 77: ADC characteristics

Updated THD values and added 4 more rows ENOB, SINAD, SNR,

THD in Table 78: ADC accuracy

Updated “SDA data hold time” and “SDA and SCL rise time” values

and added “Pulse width of spikes that are suppressed by the analog

filter” row in Table 68: I2C characteristics

Updated direct channels VDDA range in Table 79: RAIN max for fADC =

16 MHz

Moved Table 82: Temperature sensor calibration values and moved

inside Section 6.3.23: Temperature sensor characteristics

Updated IDD (WU from Standby) unit in Table 31: Typical and

maximum current consumptions in Standby mode.

Updated Table 67: LQFP64, 10 x 10 mm 64-pin low-profile quad flat

package mechanical data

Updated Chapter 8: Part numbering (title).

DocID022799 Rev 13

133/136

135

Share Link: