STM32F373VBT7(2013) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F373VBT7
(Rev.:2013)

ARM Cortex-M4 32b MCU+FPU, up to 256KB Flash+32KB SRAM timers, 4 ADCs (12/16-bit), 3 DACs, 2 comp., 2.0-3.6 V operation

STMicroelectronics 

STM32F37xxx

9

Revision history

Revision history

Date

18-Jun-2012

07-Sep-2012

Table 82. Document revision history

Revision

Changes

1

Initial release.

Added ‘F’ to all ‘Cortex-M4’ occurences

Modified the shapes of Figure 2: STM32F373x LQFP48

pinout to Figure 4: STM32F373x LQFP100 pinout

Added two rows ‘VREFSD+ - VDDSD3’ and ‘VREF+ - VDDA’

in Table 19: Voltage characteristics

Removed PB0 in footnote of Table 19: Voltage characteristics

and in Section 6.3.14: I/O port characteristics

Added a paragraph after ‘...power up sequence’ in

Section 6.2: Absolute maximum ratings and after ‘...in output

mode’ in I/O system current consumption

Corrected SDAC_VREF+ in Figure 9: Power supply scheme

Modified Table 20: Current characteristics

Added BGA100 in Table 22: General operating conditions

Added values in Table 27: Embedded internal reference

voltage

Filled values in Table 28: Typical and maximum current

consumption from VDD supply at VDD = 3.6 V

Filled values in Table 29: Typical and maximum current

consumption from VDDA supply

Filled values in Table 30: Typical and maximum VDD

consumption in Stop and Standby modes

2

Removed table: “Typical and maximum VDDA consumption in

Stop modes”

Filled values in Table 31: Typical and maximum VDDA

consumption in Stop and Standby modes

Added VBAT values in Table 32: Typical and maximum

current consumption from VBAT supply

Added typ values in Table 33: Typical current consumption in

Run mode, code with data processing running from Flash and

Table 34: Typical current consumption in Sleep mode, code

running from Flash or RAM

Added max value in Table 41: LSE oscillator characteristics

(fLSE = 32.768 kHz)

Modified min and max values in Table 42: HSI oscillator

characteristics

Added values in Table 37: Low-power mode wakeup timings

Added Class values in Table 47: EMS characteristics

Modified values in Table 48: EMI characteristics

Added values in Table 49: ESD absolute maximum ratings

Added class value in Table 50: Electrical sensitivities

Modified values and descriptions in Table 51: I/O current

injection susceptibility

DocID022691 Rev 4

127/131

130

Share Link: