STM32F373VBT7(2013) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F373VBT7
(Rev.:2013)

ARM Cortex-M4 32b MCU+FPU, up to 256KB Flash+32KB SRAM timers, 4 ADCs (12/16-bit), 3 DACs, 2 comp., 2.0-3.6 V operation

STMicroelectronics 

Revision history

STM32F37xxx

Date

19-Sep-2013

Table 82. Document revision history (continued)

Revision

Changes

Replaced “Cortex-M4F” with “Cortex-M4” throughout the

document.

Removed part number STM32F372xx.

Added “1.25 DMIPS/MHz (Dhrystone 2.1)” in Features.

Updated Introduction.

Added reference to the STMTouch touch sensing firmware

library in Section 3.16: Touch sensing controller (TSC).

Added “All I2S interfaces can operate in half-duplex mode

only.” in Section 3.21: Serial peripheral interface (SPI)/Inter-

integrated sound interfaces (I2S).

Added row “I2S full-duplex mode” to Table 9: STM32F373x

SPI/I2S implementation.

Modified introduction of I2C interface characteristics.

Added alternate function RTC_REFIN and removed additional

function RTC_REF_CLK_IN to pins PA1 and PB15.

Replaced alternate function JNTRST with NJTRST for pin

PB4.

In Table 12: Alternate functions for port PA: replaced alternate

function JTMS-SWDIO with SWDIO-JTMS for pin PA13, and

JTCK-SWCLK with SWCLK-JTCK for pin PA14.

4

Added rows VREF+ and VREFSD+ to Table 22: General

operating conditions.

Replaced "fAPB1 = fAHB/2" with "fAPB1 = fAHB" for “When the

peripherals are enabled...” in Typical current consumption.

Added COMP in Table 36: Peripheral current consumption

Added conditions for fHSE_ext in Table 38: High-speed external

user clock characteristics.

Added Min and Max values for ACCHISI in Table 42: HSI

oscillator characteristics.

Replaced reference "JESD22-C101" with "ANSI/ESD

STM5.3.1" in Table 49: ESD absolute maximum ratings.

Removed pins PB0 and PB1 in description of IINJ in Table 51:

I/O current injection susceptibility.

Updated Table 56: I2C characteristics.

Replaced all occurrences of “gain/2” with “gain*2” in Table 74:

SDADC characteristics.

Corrected typo in Figure 21: I/O AC characteristics definition.

Replaced Figure 23: I2C bus AC waveforms and

measurement circuit..

Added IDDA(ADC) and footnote 1 in Table 60: ADC

characteristics

130/131

DocID022691 Rev 4

Share Link: