Si2403
Table 14. U-Register Descriptions (Continued)
Register
U35
U37
U38
U39
U3A
U3B
U3C
U3D
U3E
U3F
U40
U42
U43
U45
U46
U47
U48
U49
U4A
Name Description
DMOT Minimum dialtone on time in seconds multiplied by 7200.
PD0 Number of pulses to dial 0.
PD1 Number of pulses to dial 1.
PD2 Number of pulses to dial 2.
PD3 Number of pulses to dial 3.
PD4 Number of pulses to dial 4.
PD5 Number of pulses to dial 5.
PD6 Number of pulses to dial 6.
PD7 Number of pulses to dial 7.
PD8 Number of pulses to dial 8.
PD9 Number of pulses to dial 9.
PDBT Pulse dial break time (ms units).
PDMT Pulse dial make time (ms units).
PDIT Pulse dial interdigit time (ms units).
DTPL
DTMF power level—16-bit format is 0x0(H)(L)0 where H is the
(–)dBm level of the high-frequency DTMF tone, and L is the (–)dBm level of
the low-frequency DTMF tone. Note that twist may be specified here.
DTNT DTMF on time (ms units).
DTFT DTMF off time (ms units).
RGFH Ring frequency high—Maximum frequency ring to be considered a valid ring.
RGFH = 2400/(maximum ring frequency).
RGFD Ring delta
Default
0x2D00
0x000A
0x0001
0x0002
0x0003
0x0004
0x0005
0x0006
0x0007
0x0008
0x0009
0x003D
0x0027
0x0320
0x09B0
0x0064
0x0064
0x0022
0x007A
RGFD = 2400Hz ×
⎛
⎝
m------i--n-----r--i-n----g---1--f-r--e----q-----(--H----z---)⎠⎞
–
⎛
⎝
m-----a----x----r--i--n---g---1--f--r--e---q-----(--H-----z---)⎠⎞
U4B
U4C
U4D
U4E
U4F
U50
RGMN Ring cadence minimum ON time in seconds multiplied by 2400.
RGNX Ring cadence maximum total time in seconds multiplied by 2400.
MOD1 This is a bit-mapped register.
PRDD Pre-dial delay-time after ATD command that modem waits to dial (ms units).
The Si2403 stays on-hook during this time.
FHT Flash Hook Time. Time corresponding with “!” or “&” dial modifier that the
Si2403 goes on-hook during a flash hook (ms units).
LCDN Loop current debounce on time (ms units).
0x0258
0x6720
0x0000
0x0000
0x01F4
0x015E
Rev. 1.2
37