ST72324BLJ2B5 View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST72324BLJ2B5

3V range 8-bit MCU with 8 to 32K Flash/ROM, 10-bit ADC, 4 timers, SPI, SCI interface

STMicroelectronics 

ST72324Lxx

SUPPLY CURRENT CHARACTERISTICS (Cont’d)

12.4.2 Supply and Clock Managers

The previous current consumption specified for the ST7 functional operating modes over temperature

range does not take into account the clock source current consumption. To get the total device consump-

tion, the two current values must be added (except for HALT mode).

Symbol

Parameter

Conditions

Typ Max 1) Unit

IDD(RCINT) Supply current of internal RC oscillator

IDD(RES) Supply current of resonator oscillator 2) & 3)

IDD(PLL) PLL supply current

625

see Section

µA

12.5.3 on page

117

180

µA

Notes:

1. Data based on characterization results, not tested in production.

2. Data based on characterization results done with the external components specified in Section 12.5.3 , not tested in

production.

3. As the oscillator is based on a current source, the consumption does not depend on the voltage.

12.4.3 On-Chip Peripherals

TA = 25°C fCPU=4MHz.

Symbol

IDD(TIM)

IDD(SPI)

IDD(ADC)

Parameter

16-bit Timer supply current 1)

SPI supply current 2)

ADC supply current when converting 3)

Conditions

VDD=3.3V

Typ

Unit

20

250

µA

300

Notes:

1. Data based on a differential IDD measurement between reset configuration (timer counter running at fCPU/4) and timer

counter stopped (only TIMD bit set). Data valid for one timer.

2. Data based on a differential IDD measurement between reset configuration (SPI disabled) and a permanent SPI master

communication at maximum speed (data sent equal to 55h). This measurement includes the pad toggling consump-

tion.

3. Data based on a differential IDD measurement between reset configuration and continuous A/D conversions.

115/154

1

Share Link: