DSPIC33EV64GM102-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

DSPIC33EV64GM102-I/SO

16-Bit, 5V Digital Signal Controllers with PWM, SENT, Op Amps and Advanced Analog Features

Microchip Technology 

dsPIC33EVXXXGM00X/10X FAMILY

16-Bit, 5V Digital Signal Controllers with

PWM, SENT, Op Amps and Advanced Analog Features

Operating Conditions

• 4.5V to 5.5V, -40°C to +85°C, DC to 70 MIPS

• 4.5V to 5.5V, -40°C to +125°C, DC to 60 MIPS

• 4.5V to 5.5V, -40°C to +150°C, DC to 40 MIPS

Core: 16-Bit dsPIC33E CPU

• Code-Efficient (C and Assembly) Architecture

• 16-Bit Wide Data Path

• Two 40-Bit Wide Accumulators

• Single-Cycle (MAC/MPY) with Dual Data Fetch

• Single-Cycle, Mixed-Sign MUL plus Hardware

Divide

• 32-Bit Multiply Support

• Intermediate Security for Memory:

- Provides a Boot Flash Segment in addition to

the existing General Flash Segment

• Error Code Correction (ECC) for Flash

• Added Two Alternate Register Sets for Fast

Context Switching

Clock Management

• Internal, 15% Low-Power RC (LPRC) – 32 kHz

• Internal, 1% Fast RC (FRC) – 7.37 MHz

• Internal, 10% Backup FRC (BFRC) – 7.37 MHz

• Programmable PLLs and Oscillator Clock Sources

• Fail-Safe Clock Monitor (FSCM)

• Additional FSCM Source (BFRC), Intended to

Provide a Clock Fail Switch Source for the

System Clock

• Independent Watchdog Timer (WDT)

• System Windowed Watchdog Timer (DMT)

• Fast Wake-up and Start-up

Power Management

• Low-Power Management modes (Sleep, Idle

and Doze)

• Power Consumption Minimized Executing

NOP String

• Integrated Power-on Reset (POR) and Brown-out

Reset (BOR)

• 0.5 mA/MHz Dynamic Current (typical)

• 50 µA at +25°C IPD Current (typical)

PWM

• Up to Six Pulse-Width Modulation (PWM) Outputs

(three generators)

• Primary Master Time Base Inputs allow

Time Base Synchronization from Internal/External

Sources

• Dead Time for Rising and Falling Edges

• 7.14 ns PWM Resolution

• PWM Support for:

- DC/DC, AC/DC, inverters, Power Factor

Correction (PFC) and lighting

- Brushless Direct Current (BLDC), Permanent

Magnet Synchronous Motor (PMSM),

AC Induction Motor (ACIM), Switched

Reluctance Motor (SRM)

- Programmable Fault inputs

- Flexible trigger configurations for

Analog-to-Digital conversion

- Supports PWM lock, PWM output chopping

and dynamic phase shifting

Advanced Analog Features

• ADC module:

- Configurable as 10-bit, 1.1 Msps with

four S&H or 12-bit, 500 ksps with one S&H

- Up to 36 analog inputs

• Flexible and Independent ADC Trigger Sources

• Up to Four Op Amp/Comparators with Direct

Connection to the ADC module:

- Additional dedicated comparator and

7-bit Digital-to-Analog Converter (DAC)

- Two comparator voltage reference outputs

- Programmable references with 128 voltage

points

- Programmable blanking and filtering

• Charge Time Measurement Unit (CTMU):

- Supports mTouch® capacitive touch sensing

- Provides high-resolution time

measurement (1 ns)

- On-chip temperature measurement

- Temperature sensor diode

- Nine sources of edge input triggers (CTED1,

CTED2, OCPWM, TMR1, SYSCLK, OSCLK,

FRC, BFRC and LPRC)

 2013-2016 Microchip Technology Inc.

DS70005144E-page 1

Share Link: