dsPIC33EVXXXGM00X/10X FAMILY
Timers/Output Compare/Input Capture
• Nine General Purpose Timers:
- Five 16-bit and up to two 32-bit
timers/counters; Timer3 can provide ADC
trigger
• Four Output Compare modules Configurable as
Timers/Counters
• Four Input Capture modules
Communication Interfaces
• Two Enhanced Addressable Universal
Asynchronous Receiver/Transmitter (UART)
modules (6.25 Mbps):
- With support for LIN/J2602 bus and IrDA®
- High and low speed (SCI)
• Two SPI modules (15 Mbps):
- 25 Mbps data rate without using PPS
• One I2C module (up to 1 Mbaud) with SMBus
Support
• Two SENT J2716 (Single-Edge Nibble
Transmission-Transmit/Receive) module for
Automotive Applications
• One CAN module:
- 32 buffers, 16 filters and three masks
Direct Memory Access (DMA)
• 4-Channel DMA with User-Selectable Priority
Arbitration
• UART, Serial Peripheral Interface (SPI), ADC,
Input Capture, Output Compare and Controller
Area Network (CAN)
Input/Output
• GPIO Registers to Support Selectable
Slew Rate I/Os
• Peripheral Pin Select (PPS) to allow Function
Remap
• Sink/Source: 8 mA or 12 mA, Pin-Specific for
Standard VOH/VOL
• Selectable Open-Drain, Pull-ups and Pull-Downs
• Change Notice Interrupts on All I/O Pins
Qualification and Class B Support
• AEC-Q100 REVG (Grade 1: -40°C to +125°C)
Compliant
• AEC-Q100 REVG (Grade 0: -40°C to +150°C)
Compliant
• Class B Safety Library, IEC 60730
Class B Fault Handling Support
• Backup FRC
• Windowed WDT uses LPRC
• Windowed Deadman Timer (DMT) uses System
Clock (System Windowed Watchdog Timer)
• H/W Clock Monitor Circuit
• Oscillator Frequency Monitoring through CTMU
(OSCI, SYSCLK, FRC, BFRC, LPRC)
• Dedicated PWM Fault Pin
• Lockable Clock Configuration
Debugger Development Support
• In-Circuit and In-Application Programming
• Three Complex and Five Simple Breakpoints
• Trace and Run-Time Watch
DS70005144E-page 2
2013-2016 Microchip Technology Inc.