STM32F302RBT7TR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM32F302RBT7TR

ARM Cortex-M4F 32b MCU+FPU, up to 256KB Flash+48KB SRAM 4 ADCs, 2 DAC ch., 7 comp, 4 PGA, timers, 2.0-3.6 V operation

STMicroelectronics 

Revision history

9

Revision history

STM32F302xx/STM32F303xx

Table 81. Document revision history

Date

Revision

Changes

22-Jun-2012

1

Initial release

07-Sep-2012

Modified Features on cover page.

Modified Table 2: STM32F301xx family device features and peripheral

counts

Added clock tree to Section 3.8: Clocks and startup

Added Table 5: STM32F30xB/C I2C implementation

Added Table 6: USART features

Added Table 7: STM32F30xB/C SPI/I2S implementation

Modified Table 8: Capacitive sensing GPIOs available on

STM32F302xx/STM32F303xx devices

Modified Figure 5, Figure 6 and Figure 7:

STM32F302xx/STM32F303xx LQFP100 pinout

Modified Table 11: STM32F302xx/STM32F303xx pin definitions

Modified Figure 11: Power supply scheme

Modified Table 19: Voltage characteristics

Modified Table 20: Current characteristics

Modified Table 23: Operating conditions at power-up / power-down

Added footnote to Table 29: Typical and maximum current consumption

from the VDDA supply

2

Added footnote to Table 33 and Table 34: Typical current consumption

in Sleep mode, code running from Flash or RAM

Removed table “Switching output I/O current consumption” and table

“Peripheral current consumption”

Added note under Figure 17: Typical application with a 32.768 kHz

crystal

Updated Table 42: HSI oscillator characteristics

Updated Wakeup time from low-power mode and Table 37: Low-power

mode wakeup timings

Updated Table 45: Flash memory characteristics

Updated Table 50: Electrical sensitivities

Updated Table 51: I/O current injection susceptibility

Updated Table 52: I/O static characteristics

Updated Table 53: Output voltage characteristics

Updated Table 55: NRST pin characteristics

Updated Table 61: SPI characteristics

Updated Table 62: I2S characteristics

Corrected LQFP100 in Section 7.2.3: Selecting the product

temperature range

21-Sep-2012

3

Updated Table 61: SPI characteristics

130/133

Doc ID 023353 Rev 5

Share Link: