16 REVISION HISTORY
Table 34. Revision History
Date
Revision
Description of Changes
26-Sep-2005
04-Dec-2006
04-Apr-2007
1 Initial release
Modified LQFP48 pinout, added S device ordering information
Modified Note 4 on page 16 for unbonded pins in 48 pin C devices
Added caution about reset vector in unprogrammed Flash devices in Section 6.3.
2
Removed EMC protective circuitry in Figure 89 on page 163 (device works correctly without
these components)
Modified SS min. setup time and added note 4 to section 12.11.1 on page 166
Modifed description PKG1 bit in “FLASH OPTION BYTES” on page 180
Added “TIMD set simultaneously with OC interrupt” on page 193
In Table 2 added note 5 for I/O Port E2 (PE2) output mode “pull-up always activated” and
added note 6 on connection of power and ground pins.
Deleted the sentence in Section 4.3.1 ‘Readout protection is not supported if LVD is enabled
3
Added Package dimensions for LQFP64 14 x14 in Figure 100
Specified EMI data for LQFP64 in Section 12.7.2
Added ‘Pull-up always active on PE2’ in Section 15.1.8
195/196