ST72361J4-AUTO View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST72361J4-AUTO

8-bit MCU for automotive with Flash or ROM, 10-bit ADC, 5 timers, SPI, LINSCI™

STMicroelectronics 

ST72361xx-Auto

Electrical characteristics

19.2.2 Current characteristics

19.2.3

Symbol

Ratings

Maximum value Unit

IVDD

Total current into VDD power lines (source)(1)

150

IVSS

Total current out of VSS ground lines (sink)(1)

Output current sunk by any standard I/O and

control pin

25

IIO

Output current sunk by any high sink I/O pin

50

Output current source by any I/Os and control

pin

-25

Injected current on VPP pin

mA

Injected current on RESET pin

±5

IINJ(PIN)(2)(3)

Injected current on OSC1 and OSC2 pins

Injected current on PB3 (on Flash devices)

+5

Injected current on any other pin(4)

±5

IINJ(PIN)(2)

Total injected current (sum of all I/O and control

pins)(4)

±25

1. All power (VDD) and ground (VSS) lines must always be connected to the external supply.

2. IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum

cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive

injection is induced by VIN>VDD while a negative injection is induced by VIN < VSS. For true open-drain

pads, there is no positive injection current, and the corresponding VIN maximum must always be respected.

3. Negative injection disturbs the analog performance of the device. See note in Section 20.13: 10-bit ADC

characteristics.

4. When several inputs are submitted to a current injection, the maximum IINJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values). These results are based on

characterization with IINJ(PIN) maximum current injection on four I/O port pins of the device.

Thermal characteristics

Symbol

TSTG

TJ

Ratings

Value

Unit

Storage temperature range

-65 to +150

°C

Maximum junction temperature (see Section 21.3: Thermal characteristics)

Doc ID 12468 Rev 3

229/279

Share Link: