Electrical characteristics
STM32WB55xx STM32WB35xx
Symbol
Table 27. RF transmitter BLE characteristics (2 Mbps)(1)
Parameter
Test conditions
Min Typ Max Unit
Prf
Pband
BW6dB
IBSE
fd
maxdr
fo
∆f1
Maximum output power
0 dBm output power
SMPS Bypass or ONï€
V(VDFDBS>M1P.S95=V1).(72)V andï€
SMPS Bypass or ONï€
V(VDFDBS>M1P.S71=V1).,4CVodaend2ï€ 9(2)
-
- 6.0
- 3.7
-0
Minimum output power
-
- -20
Output power variation over the band Tx = 0 dBm - Typical
-0.5 -
6 dB signal bandwidth
In band spurious emission
4 MHz
5 MHz
≥ 6 MHz
Tx = maximum output power
Bluetooth® Low Energy: -20 dBm
Bluetooth® Low Energy: -20 dBm
Bluetooth® Low Energy: -30 dBm
- 670
- -56
- -57
-58
Frequency drift
Maximum drift rate
Frequency offset
Frequency deviation average
Bluetooth® Low Energy: ±50 kHz -50 -
Bluetooth® Low Energy:ï€
±20 kHz / 50 µs
-20 -
Bluetooth® Low Energy: ±150 kHz -150 -
Bluetooth® Low Energy: ï€
between 450 and 550 kHz
450 -
-
- dBm
-
-
0.4 dB
- kHz
-
- dBm
50 kHz
20
kHz/
50 µs
150
kHz
550
∆fa
OBSE(3)
Frequency deviationï€
∆f2 (average) / ∆f1 (average)
Out of bandï€
spurious emission
< 1 GHz
≥ 1 GHz
Bluetooth® Low Energy:> 0.80
-
-
0.80 -
-
-
- -61 -
dBm
- -46 -
1. Measured in conducted mode, based on reference design (see AN5165), using output power specific external RF filter and
impedance matching networks to interface with a 50 Ω antenna.
2. SVMFBPSSMPoSnaSnTdMV3D2DWmBuSstebrieessemt itcorodcifofenrteronltlevrosl,taagveaillaebvelelso,ndewpwewn.dsitn.cgoump)o.n the desired TX signal (see AN5246 Usage of
3. Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440
Class 2 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
90/193
DS11929 Rev 10