CL-PS7500FE データシートの表示（PDF） - Cirrus Logic

部品番号

コンポーネント説明

メーカー

CL-PS7500FE

System-on-a Chip for Internet Appliance

Cirrus Logic 

CL-PS7500FE

System-on-a-Chip for Internet Appliance

6.9 Domain Access Control

MMU accesses are primarily controlled through domains. There are 16 domains, and each has a 2-bit

field to define it. Two basic kinds of users are supported:

q Clients use a domain, and

q Managers control the behavior of the domain.

The domains are defined in the Domain Access Control register. Figure 6-9 illustrates how the 32 bits of

the register are allocated to define the sixteen 2-bit domains.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0

15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

0

Figure 6-9. Domain Access Control Register Format

Table 6-5 defines how the bits within each domain are interpreted to specify the access permissions.

Table 6-5. Interpreting Access Bits in Domain Access Control Register

Value Meaning

Notes

00 No access Any access generates a Domain fault.

01 Client

Accesses are checked against the access permission bits in the Section or Page descriptor.

10 Reserved Reserved. Currently behaves like the No Access mode.

11

Manager

Accesses are not checked against the access Permission bits, so a Permission fault cannot be gen-

erated.

6.10 Fault-Checking Sequence

The sequence used by the MMU to check for access faults is slightly different for Sections and Pages.

Figure 6-9 illustrates the sequence for both types of accesses. The following sections and figures describe

the conditions that generate each of the faults.

48

ARM PROCESSOR MMU

ADVANCE DATA BOOK v2.0

June 1997

Share Link: