ST7PSCR1E4M1/XXX データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

ST7PSCR1E4M1/XXX

8-BIT LOW-POWER, FULL-SPEED USB MCU WITH 16K FLASH, 768 RAM, SMARTCARD I/F, TIMER

STMicroelectronics 

ST7SCR

EMC CHARACTERISTICS (Cont’d)

14.7.3 ESD Pin Protection Strategy

To protect an integrated circuit against Electro-

Static Discharge the stress must be controlled to

prevent degradation or destruction of the circuit el-

ements. The stress generally affects the circuit el-

ements which are connected to the pads but can

also affect the internal devices when the supply

pads receive the stress. The elements to be pro-

tected must not receive excessive current, voltage

or heating within their structure.

An ESD network combines the different input and

output ESD protections. This network works, by al-

lowing safe discharge paths for the pins subjected

to ESD stress. Two critical ESD stress cases are

presented in Figure 42 and Figure 43 for standard

pins.

Standard Pin Protection

To protect the output structure the following ele-

ments are added:

– A diode to VDD (3a) and a diode from VSS (3b)

– A protection device between VDD and VSS (4)

To protect the input structure the following ele-

ments are added:

– A resistor in series with the pad (1)

– A diode to VDD (2a) and a diode from VSS (2b)

– A protection device between VDD and VSS (4)

Figure 42. Positive Stress on a Standard Pad vs. VSS

VDD

VDD

(3a)

(2a)

Main path

Path to avoid

(1)

OUT

(4)

IN

(3b)

(2b)

VSS

VSS

Figure 43. Negative Stress on a Standard Pad vs. VDD

VDD

VDD

Main path

(3a)

(2a)

(1)

OUT

(4)

IN

(3b)

(2b)

VSS

VSS

87/102

Share Link: