STM32F205VE 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STM32F205VE

ARM-based 32-bit MCU, 150DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

STMicroelectronics 

Electrical characteristics

5.1.7

Current consumption measurement

Figure 18. Current consumption measurement scheme

IDD_VBAT

VBAT

STM32F20xxx

IDD

VDD

VDDA

ai14126

5.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 9: Voltage characteristics,

Table 10: Current characteristics, and Table 11: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 9. Voltage characteristics

Symbol

Ratings

Min

Max Unit

VDD–VSS External main supply voltage (including VDDA, VDD)(1)

–0.3

4.0

Input voltage on five-volt tolerant pin(2)

VIN

Input voltage on any other pin

VSS–0.3 VDD+4 V

VSS–0.3

4.0

|ΔVDDx| Variations between different VDD power pins

|VSSX − VSS| Variations between all the different ground pins

-

50

mV

-

50

VESD(HBM) Electrostatic discharge voltage (human body model)

see Section 5.3.14:

Absolute maximum

ratings (electrical

sensitivity)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

2. VIN maximum value must always be respected. Refer to Table 10 for the values of the maximum allowed

injected current.

62/177

Doc ID 15818 Rev 9

Share Link: