DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

PIC16F1512T-E/SO 查看數據表(PDF) - Microchip Technology

零件编号
产品描述 (功能)
生产厂家
PIC16F1512T-E/SO
Microchip
Microchip Technology 
PIC16F1512T-E/SO Datasheet PDF : 360 Pages
First Prev 301 302 303 304 305 306 307 308 309 310 Next Last
PIC16(L)F1512/3
TABLE 25-12: ANALOG-TO-DIGITAL CONVERTER (ADC) CHARACTERISTICS:
Operating Conditions (unless otherwise stated)
VDD = 3.0V, TA = 25°C
Param
No.
Sym.
Characteristic
Min. Typ† Max. Units
Conditions
AD01 NR Resolution
10 bit
AD02 EIL Integral Error
— ±1.25 LSb VREF = 3.0V
AD03 EDL Differential Error
±1 LSb No missing codes
VREF = 3.0V
AD04 EOFF Offset Error
— ±2.5 LSb VREF = 3.0V
AD05 EGN Gain Error
AD06 VREF Reference Voltage(3)
— ±2.0 LSb VREF = 3.0V
1.8
VDD V
AD07 VAIN Full-Scale Range
VSS
VREF V
AD08 ZAIN Recommended Impedance of
Analog Voltage Source
10 k
*
Note 1:
2:
3:
4:
5:
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
Total Absolute Error includes integral, differential, offset and gain errors.
The A/D conversion result never decreases with an increase in the input voltage and has no missing codes.
ADC VREF is from external VREF, VDD pin or FVR, whichever is selected as reference input.
When ADC is off, it will not consume any current other than leakage current. The power-down current specification
includes any such leakage from the ADC module.
FVR voltage selected must be 2.048V or 4.096V.
TABLE 25-13: A/D CONVERSION REQUIREMENTS
Standard Operating Conditions (unless otherwise stated)
Param
No.
Sym.
Characteristic
Min.
Typ†
Max. Units
Conditions
AD130* TAD A/D Clock Period
1.0
9.0 s TOSC-based
A/D Internal RC Oscillator
Period
1.0
1.6
6.0 s ADCS<1:0> = 11 (ADRC mode)
AD131 TCNV Conversion Time (not including —
11
— TAD Set GO/DONE bit to conversion
Acquisition Time)(1)
complete
AD132* TACQ Acquisition Time
5.0
s
*
Note 1:
These parameters are characterized but not tested.
Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not
tested.
The ADRES register may be read on the following TCY cycle.
DS40001624C-page 302
2012-2014 Microchip Technology Inc.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]