PSD501B1-C-90UI 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
PSD501B1-C-90UI Datasheet PDF : 153 Pages
| |||
PSD5XX Family
Power
Management
Unit
(Cont.)
60
Table 17. Power Management Mode Registers (PMMR0, PMMR1)
PMMR0
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
TMR CLK ZPLD
RCLK
ZPLD
ACLK
ZPLD
TURBO
CMISER
APD
ENABLE
ALE PD
Polarity
*
1 = OFF 1 = OFF 1 = OFF 1 = OFF 1 = ON 1 = ON 1 = HIGH
Bit 0 * = Should be set to High (1) to operate the APD.
Bit 1 0 = ALE Power Down (PD) Polarity Low.
1 = ALE Power Down (PD) Polarity High.
Bit 2 0 = Automatic Power Down (APD) Disable.
1 = Automatic Power Down (APD) Enable.
Bit 3 0 = EPROM/SRAM CMiser is OFF.
1 = EPROM/SRAM CMiser is ON.
Bit 4 0 = ZPLD Turbo is ON. ZPLD is always ON.
1 = ZPLD Turbo is OFF. ZPLD will Power Down when inputs are not changing.
Bit 5 0 = ZPLD Clock Input into the Array from the CLKIN pin input is connected. Every
Clock change will Power Up the ZPLD when Turbo bit is OFF.
1 = ZPLD Clock Input into the Array from the CLKIN pin input is disconnected.
Bit 6 0 = ZPLD Clock Input into the the MacroCell registers from the CLKIN pin input
is connected.
1 = ZPLD Clock Input into the the MacroCell registers from the CLKIN pin input
is disconnected.
Bit 7 0 = In the PSD5XX Clock Input is connected to the Timer.
1 = In the PSD5XX Clock Input is disconnected from the Timer.
PMMR1
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Sleep APD CLK
*
*
*
*
*
*
Mode
1 = ON 1 = CLKIN
Bit 0
0 = Automatic Power Down Unit Clock is connected to Port E7 (PE7) alternate
function input.
1 = Automatic Power Down Unit Clock is connected to the PSD Clock
input (CLKIN).
Bit 1 0 = Sleep Mode Disabled.
1 = Sleep Mode Enabled.
Bit 2–7 0 = Reserved for future use, should be set to zero.
Table 18. APD Counter Operation
APD EN Bit
ALE Power
Down Polarity
0
X
1
X
1
1
1
0
ALE Status
X
Pulsing
1
0
APD Counter
Not Counting
Not Counting
Counting (Activates Standby
Mode After 15 Clocks)
Counting (Activates Standby
Mode After 15 Clocks)
Share Link: 