ADE3700XT View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ADE3700XT

Analog LCD Display Engine for XGA and SXGA Resolutions

STMicroelectronics 

Sync Multiplexer (SMUX)

ADE3700

Table 11: Sync Multiplexer Registers (Sheet 3 of 4)

Register Name

SMUX_CTRL3

SMUX_CLAMP_SET_L

SMUX_CLAMP_SET_U

SMUX_CLAMP_RST_L

SMUX_CLAMP_RST_U

SMUX_HENAB_SET_L

HENAB _SET_U

HENAB _RST_L

HENAB _RST_U

VENAB_SET_L

VENAB _SET_U

VENAB _RST_L

VENAB _RST_U

Addr

0x0203

0x0204

0x0205

0x0206

0x0207

0x0208

0x0209

0x020A

0x020B

0x020C

0x020D

0x020E

0x020F

Mode Bits Default

Description

R

[7:6]

R

[5]

[4]

R/W

[3:2] 0x0

R/W

[1:0] 0x0

R/W

[7:0] 0x0

R/W

[3:0] 0x0

R/W

[7:0] 0x0

R/W

[3:0] 0x0

R/W

[7:0] 0x0

R/W

[3:0] 0x0

R/W

[7:0] 0x00

R/W

[3:0] 0x0

R/W

[7:0] 0x00

R/W

[3:0] 0x0

R/W

[7:0] 0x00

R/W

[3:0] 0x0

venab pending state

0x0: idle

0x1: venab pending frame 1

0x2: venab pending frame 2

Wait until 0 to write venab again if in henab or

venab shadow mode.

henab pending

Reserved

vtrigger reference

2’bx0: trigger ref = venab

2’b01: last pixel w/ anti-glitch

2’b11: first pixel w/ anti-glitch

Anti-glitch modes work only with venab shadow

mode. First/last pixel must be consistent with

out_seq in this mode.

0x0: no shadow

0x1: simple shadow. When henab_rst_u is

written, henab_set_l, henab_set_u, henab_rst_l

take effect. When venab_rst_u is written,

venab_set_l, venab_set_u, venab_rst_l take

effect.

0x2: henab shadow. Wait for next available blank

period to update positions after henab_rst_u or

venab_rst_u is written.

0x3: venab shadow. Wait for next available vblank

period to update positions after henab_rst_u or

venab_rst_u is written. Venab update takes two

frames. State can be watched in ctrl3[7:5].

ADC clamp signal rising edge [11:0], relative to

selected H reference signal, in INCLKS (pixels)

ADC clamp signal MSBs

ADC clamp falling edge

ADC clamp falling edge

Horizontal enable start [11:0] (left edge of image)

relative to the selected H reference edge in

INCLKS (pixels)

horizontal enable start MSBs

horizontal enable end LSBs

horizontal enable end MSBs

vertical enable start (top edge of image) relative

to the selected vertical reference edge in lines

vertical enable start MSBs

vertical enable end LSBs

vertical enable end MSBs

36/89

Share Link: