5. This requirement applies to all ATmega64 Two-wire Serial Interface operation. Other devices connected to the Two-wire
Serial Bus need only obey the general fSCL requirement.
6. The actual low period generated by the ATmega64 Two-wire Serial Interface is (1/fSCL - 2/fCK), thus fCK must be greater than
6 MHz for the low time requirement to be strictly met at fSCL = 100 kHz.
7. The actual low period generated by the ATmega64 Two-wire Serial Interface is (1/fSCL - 2/fCK), thus the low time requirement
will not be strictly met for fSCL > 308 kHz when fCK = 8 MHz. Still, ATmega64 devices connected to the bus may communicate
at full speed (400 kHz) with other ATmega64 devices, as well as any other device with a proper tLOW acceptance margin.
Figure 156. Two-wire Serial Bus Timing
SCL
SDA
tSU;STA
tof
tLOW
tHD;STA
tHIGH
tHD;DAT
tLOW
tSU;DAT
tr
tSU;STO
tBUF
330 ATmega64(L)
2490G–AVR–03/04