C8051F045 View Datasheet(PDF) - Silicon Laboratories
Part Name
Description
Manufacturer
C8051F045 Datasheet PDF : 328 Pages
| |||
C8051F040/1/2/3/4/5/6/7
SFR Definition 17.22. P7: Port7 Data
R/W
P7.7
Bit7
R/W
P7.6
Bit6
R/W
P7.5
Bit5
R/W
P7.4
Bit4
R/W
P7.3
Bit3
R/W
P7.2
Bit2
R/W
P7.1
Bit1
R/W
Reset Value
P7.0 11111111
Bit0
Bit
Addressable
SFR Address: 0xF8
SFR Page: F
Bits7-0:
P7.[7:0]: Port7 Output Latch Bits.
Write - Output appears on I/O pins.
0: Logic Low Output.
1: Logic High Output (Open-Drain if corresponding P7MDOUT bit = 0). See SFR Definition
17.23.
Read - Returns states of I/O pins.
0: P7.n pin is logic low.
1: P7.n pin is logic high.
Note:
P7.[7:0] can be driven by the External Data Memory Interface (as AD[7:0] in Multiplexed
mode, or as D[7:0] in Non-multiplexed mode). See Section “16. External Data Memory
Interface and On-Chip XRAM” on page 187 for more information about the External Mem-
ory Interface.
SFR Definition 17.23. P7MDOUT: Port7 Output Mode
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
00000000
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
SFR Address: 0x9F
SFR Page: F
Bits7-0: P7MDOUT.[7:0]: Port7 Output Mode Bits.
0: Port Pin output mode is configured as Open-Drain.
1: Port Pin output mode is configured as Push-Pull.
Note:
SDA, SCL, and RX0 (when UART0 is in Mode 0) and RX1 (when UART1 is in Mode 0) are
always configured as Open-Drain when they appear on Port pins.
Rev. 1.5
225
Share Link: 