MC908QL4ME View Datasheet(PDF) - Freescale Semiconductor
Part Name
Description
Manufacturer
MC908QL4ME Datasheet PDF : 226 Pages
| |||
FLASH Memory (FLASH)
2.6.1 FLASH Control Register
The FLASH control register (FLCR) controls FLASH program and erase operations.
Bit 7
6
5
Read: 0
0
0
Write:
Reset: 0
0
0
= Unimplemented
4
3
2
1
Bit 0
0
HVEN MASS ERASE PGM
0
0
0
0
0
Figure 2-3. FLASH Control Register (FLCR)
HVEN — High Voltage Enable Bit
This read/write bit enables high voltage from the charge pump to the memory for either program or
erase operation. It can only be set if either PGM =1 or ERASE =1 and the proper sequence for
program or erase is followed.
1 = High voltage enabled to array and charge pump on
0 = High voltage disabled to array and charge pump off
MASS — Mass Erase Control Bit
This read/write bit configures the memory for mass erase operation.
1 = Mass erase operation selected
0 = Mass erase operation unselected
ERASE — Erase Control Bit
This read/write bit configures the memory for erase operation. ERASE is interlocked with the PGM bit
such that both bits cannot be equal to 1 or set to 1 at the same time.
1 = Erase operation selected
0 = Erase operation unselected
PGM — Program Control Bit
This read/write bit configures the memory for program operation. PGM is interlocked with the ERASE
bit such that both bits cannot be equal to 1 or set to 1 at the same time.
1 = Program operation selected
0 = Program operation unselected
MC68HC908QL4 Data Sheet, Rev. 7
Freescale Semiconductor
35
Share Link: 