PIC16LC924-08/CL View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16LC924-08/CL Datasheet PDF : 189 Pages
| |||
PIC16C9XX
17.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Ambient temperature under bias............................................................................................................ .-55˚C to +125˚C
Storage temperature .............................................................................................................................. -65˚C to +150˚C
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4).......................................... -0.3V to (VDD + 0.3V)
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +7.5V
Voltage on MCLR with respect to VSS............................................................................................................. 0V to +14V
Voltage on RA4 with respect to Vss ................................................................................................................ 0V to +14V
Total power dissipation (Note 1)................................................................................................................................1.0W
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into VDD pin ..............................................................................................................................250 mA
Input clamp current, IIK (VI < 0 or VI > VDD).....................................................................................................................± 20 mA
Output clamp current, IOK (VO < 0 or VO > VDD).............................................................................................................± 20 mA
Maximum output current sunk by any I/O pin .........................................................................................................10 mA
Maximum output current sourced by any I/O pin ...................................................................................................10 mA
Maximum current sunk by all Ports combined ......................................................................................................200 mA
Maximum current sourced by all Ports combined ................................................................................................200 mA
Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD - ∑ IOH} + ∑ {(VDD - VOH) x IOH} + ∑(VOl x IOL)
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions above those
indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions for
extended periods may affect device reliability.
TABLE 17-1: CROSS REFERENCE OF DEVICE SPECS FOR OSCILLATOR CONFIGURATIONS AND
FREQUENCIES OF OPERATION (COMMERCIAL DEVICES)
OSC
PIC16C923-04
PIC16C924-04
PIC16C923-08
PIC16C924-08
PIC16LC923-04
PIC16LC924-04
CL Devices
VDD: 4.0V to 6.0V
RC
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 2.5V to 6.0V
IDD: 3.8 mA max. at 3.0V
IPD: 5 µA max. at 3V
Freq: 4 MHz max.
VDD: 2.5V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.0V to 6.0V
XT
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
IDD: 2.7 mA typ. at 5.5V
IPD: 1.5 µA typ. at 4V
Freq: 4 MHz max.
VDD: 2.5V to 6.0V
IDD: 3.8 mA max. at 3.0V
IPD: 5 µA max. at 3V
Freq: 4 MHz max.
VDD: 2.5V to 6.0V
IDD: 5 mA max. at 5.5V
IPD: 21 µA max. at 4V
Freq: 4 MHz max.
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
VDD: 4.5V to 5.5V
IDD: 3.5 mA typ. at 5.5V IDD: 7 mA max. at 5.5V
HS
Do not use in HS mode
IPD: 1.5 µA typ. at 4.5V IPD: 1.5 µA typ. at 4.5V
IDD: 7 mA max. at 5.5V
IPD: 1.5 µA typ. at 4.5V
Freq: 4 MHz max.
Freq: 8 MHz max.
Freq: 8 MHz max.
VDD: 4.0V to 6.0V
IDD: 22.5 µA typ.
LP
at 32 kHz, 4.0V
IPD: 1.5 µA typ. at 4.0V
Freq: 200 kHz max.
Do not use in LP mode
VDD: 2.5V to 6.0V
IDD: 30 µA max. at 32 kHz, 3.0V
IPD: 5 µA max. at 3.0V
Freq: 200 kHz max.
VDD: 2.5V to 6.0V
IDD: 30 µA max.
at 32 kHz, 3.0V
IPD: 5 µA max. at 3.0V
Freq: 200 kHz max.
The shaded sections indicate oscillator selections which are tested for functionality, but not for MIN/MAX specifications.
It is recommended that the user select the device type that ensures the specifications required.
© 1997 Microchip Technology Inc.
DS30444E - page 141
Share Link: 