PIC16LC62B-04E/SO View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
PIC16LC62B-04E/SO Datasheet PDF : 120 Pages
| |||
PIC16C62B/72A
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature 0°C ≤ TA ≤ +70°C for commercial
-40°C ≤ TA ≤ +85°C for industrial
-40°C ≤ TA ≤+125°C for extended
Operating voltage VDD range as described in DC spec Section 13.1
and Section 13.2
Param Sym
No.
Characteristic
Min Typ† Max Units
Conditions
-
-
0.6
V IOL = 7.0 mA, VDD = 4.5V,
-40°C to +125°C
D083
OSC2/CLKOUT
(RC osc mode)
-
-
0.6
V IOL = 1.6 mA, VDD = 4.5V,
-40°C to +85°C
-
-
0.6
V IOL = 1.2 mA, VDD = 4.5V,
-40°C to +125°C
Output High Voltage
D090 VOH I/O ports (Note 3)
VDD-0.7 -
-
V IOH = -3.0 mA, VDD = 4.5V,
-40°C to +85°C
VDD-0.7 -
-
V IOH = -2.5 mA, VDD = 4.5V,
-40°C to +125°C
D092
OSC2/CLKOUT (RC osc
VDD-0.7 -
-
V IOH = -1.3 mA, VDD = 4.5V,
mode)
-40°C to +85°C
VDD-0.7 -
-
V IOH = -1.0 mA, VDD = 4.5V,
-40°C to +125°C
D150* VOD Open-Drain High Voltage
-
-
8.5
V RA4 pin
Capacitive Loading Specs
on Output Pins
D100 COSC2 OSC2 pin
-
-
15
pF In XT, HS and LP modes when
external clock is used to drive
OSC1.
D101 CIO All I/O pins and OSC2 (in RC
-
mode)
D102 Cb SCL, SDA in I2C mode
-
-
50
pF
-
400 pF
* These parameters are characterized but not tested.
† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only
and are not tested.
Note 1: In RC oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the
device be driven with external clock in RC mode.
2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified
levels represent normal operating conditions. Higher leakage current may be measured at different input volt-
ages.
3: Negative current is defined as current sourced by the pin.
© 1998 Microchip Technology Inc.
Preliminary
DS35008B-page 87
Share Link: 