PIC16C745/SP View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16C745/SP

8-Bit CMOS Microcontrollers with USB

Microchip Technology 

4.0 MEMORY ORGANIZATION

4.1 Program Memory Organization

The PIC16C745/765 has a 13-bit program counter

capable of addressing an 8K x 14 program memory

space. All devices covered by this datasheet have 8K x

14 bits of program memory. The address range is

0000h - 1FFFh for all devices.

The reset vector is at 0000h and the interrupt vector is

at 0004h.

FIGURE 4-1: PIC16C745/765 PROGRAM

MEMORY MAP AND STACK

PC<12:0>

CALL, RETURN

13

RETFIE, RETLW

Stack Level 1

Stack Level 2

Stack Level 8

Reset Vector

0000h

PIC16C745/765

4.2 Data Memory Organization

The data memory is partitioned into multiple banks

which contain the General Purpose Registers (GPR)

and the Special Function Registers (SFR). Bits RP1

and RP0 are the bank select bits.

RP<1:0> (STATUS<6:5>)

= 00 → Bank0

= 01 → Bank1

= 10 → Bank2

= 11 → Bank3

Each bank extends up to 7Fh (128 bytes). The lower

locations of each bank are reserved for the SFRs.

Above the SFRs are GPRs, implemented as static

RAM.

All implemented banks contain SFRs. Some “high use”

SFRs from one bank may be mirrored in another bank

for code reduction and quicker access.

4.2.1 GENERAL PURPOSE REGISTER FILE

The register file can be accessed either directly or indi-

rectly through the File Select Register (FSR)

(Section 4.5).

On-chip

Program

Memory

Interrupt Vector

Page 0

Page 1

Page 2

Page 3

0004h

0005h

07FFh

0800h

0FFFh

1000h

17FFh

1800h

1FFFh

© 1999 Microchip Technology Inc.

Advanced Information

DS41124A-page 15

Share Link: