PIC16C712T-04/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

PIC16C712T-04/SO

8-Bit CMOS Microcontrollers with A/D Converter and Capture/Compare/PWM

Microchip Technology 

PIC16C712/716

Standard Operating Conditions (unless otherwise stated)

Operating temperature 0°C ≤ TA ≤ +70°C for commercial

DC CHARACTERISTICS

-40°C ≤ TA ≤ +85°C for industrial

-40°C ≤ TA ≤ +125°C for extended

Operating voltage VDD range as described in DC spec Section 12.1

and Section 12.2

Param Sym

Characteristic

Min Typ† Max Units

Conditions

No.

Output High Voltage

D090 VOH I/O ports (Note 3)

VDD-0.7 -

-

V IOH = -3.0 mA, VDD = 4.5V,

-40°C to +85°C

VDD-0.7 -

-

V IOH = -2.5 mA, VDD = 4.5V,

-40°C to +125°C

D092

OSC2/CLKOUT (RC osc

VDD-0.7 -

-

V IOH = -1.3 mA, VDD = 4.5V,

mode)

-40°C to +85°C

VDD-0.7 -

-

V IOH = -1.0 mA, VDD = 4.5V,

-40°C to +125°C

D150* VOD Open-Drain High Voltage

-

-

8.5

V RA4 pin

Capacitive Loading Specs

on Output Pins

D100 COSC2 OSC2 pin

-

-

15

pF In XT, HS and LP modes when

external clock is used to drive

OSC1.

D101 CIO All I/O pins and OSC2 (in RC

-

-

50

pF

mode)

* These parameters are characterized but not tested.

† Data in “Typ” column is at 5V, 25°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

Note 1: In RC oscillator mode, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the PICmi-

cro be driven with external clock in RC mode.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The specified

levels represent normal operating conditions. Higher leakage current may be measured at different input volt-

ages.

3: Negative current is defined as current sourced by the pin.

DS41106A-page 80

Preliminary

© 1999 Microchip Technology Inc.

Share Link: