STM8S003K3(2012) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8S003K3
(Rev.:2012)

Value line, 16 MHz STM8S 8-bit MCU, 8 Kbytes Flash, 128 bytes data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C

STMicroelectronics 

Electrical characteristics

STM8S003K3 STM8S003F3

(1) Data based on a differential IDD measurement between reset configuration and timer counter running

at 16 MHz. No IC/OC programmed (no I/O pads toggling). Not tested in production.

(2) Data based on a differential IDD measurement between the on-chip peripheral when kept under reset

and not clocked and the on-chip peripheral when clocked and not kept under reset. No I/O pads toggling.

Not tested in production.

(3) Data based on a differential IDD measurement between reset configuration and continuous A/D

conversions. Not tested in production.

9.3.2.8

Current consumption curves

The following figures show typical current consumption measured with code executing in

RAM.

Figure 11: Typ IDD(RUN) vs. VDD HSE user external clock, fCPU = 16 MHz

Figure 12: Typ IDD(RUN) vs. fCPU HSE user external clock, VDD = 5 V

58/100

DocID018576 Rev 3

Share Link: