M24C01-FDW6G View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

M24C01-FDW6G

1-Kbit and 2-Kbit serial I²C bus EEPROMs

STMicroelectronics 

M24C01/02-W M24C01/02-R M24C02-F

7

Maximum rating

Maximum rating

Stressing the device outside the ratings listed in Table 4 may cause permanent damage to

the device. These are stress ratings only, and operation of the device at these, or any other

conditions outside those indicated in the operating sections of this specification, is not

implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

Table 4. Absolute maximum ratings

Symbol

Parameter

Min.

Max. Unit

TSTG

TLEAD

Ambient operating temperature

Storage temperature

Lead temperature during soldering

PDIP-specific lead temperature during soldering

-

130

°C

–65

150

°C

see note(1)

°C

-

260(2)

°C

IOL

DC output current (SDA = 0)

-

5

mA

VIO

Input or output range

–0.50

6.5

V

VCC

VESD

Supply voltage

Electrostatic pulse (Human Body model)(3)

–0.50

6.5

V

-

3000(4)

V

1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb-free assembly), the ST ECOPACK®

7191395 specification, and the European directive on Restrictions of Hazardous Substances (RoHS)

2011/65/EU.

2. TLEAD max must not be applied for more than 10 s.

3. Positive and negative pulses applied on different combinations of pin connections, according to AEC-

Q100-002 (compliant with JEDEC Std JESD22-A114, C1=100 pF, R1=1500 Ω).

4. 4000 V for devices identified by process letters S or G.

DocID024020 Rev 2

19/34

33

Share Link: