DSPIC33FJ16GS102-I/SO View Datasheet(PDF) - Microchip Technology

Part Name

Description

Manufacturer

DSPIC33FJ16GS102-I/SO

High-Performance, 16-bit Digital Signal Controllers

Microchip Technology 

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

REGISTER 19-6: ADCPC1: A/D CONVERT PAIR CONTROL REGISTER 1 (CONTINUED)

bit 12-8

bit 7

bit 6

bit 5

TRGSRC3<4:0>: Trigger 3 Source Selection bits(1)

Selects trigger source for conversion of analog channels AN7 and AN6.

00000 = No conversion enabled

00001 = Individual software trigger selected

00010 = Global software trigger selected

00011 = PWM Special Event Trigger selected

00100 = PWM Generator 1 primary trigger selected

00101 = PWM Generator 2 primary trigger selected

00110 = PWM Generator 3 primary trigger selected

00111 = PWM Generator 4 primary trigger selected

01000 = Reserved

•

•

•

01100 = Timer1 period match

01101 = Reserved

01110 = PWM Generator 1 secondary trigger selected

01111 = PWM Generator 2 secondary trigger selected

10000 = PWM Generator 3 secondary trigger selected

10001 = PWM Generator 4 secondary trigger selected

10010 = Reserved

•

•

•

10110 = Reserved

10111 = PWM Generator 1 current-limit ADC trigger

11000 = PWM Generator 2 current-limit ADC trigger

11001 = PWM Generator 3 current-limit ADC trigger

11010 = PWM Generator 4 current-limit ADC trigger

11011 = Reserved

•

•

•

11111 = Timer2 period match

IRQEN2: Interrupt Request Enable 2 bit(2)

1 = Enable IRQ generation when requested conversion of channels AN5 and AN4 is completed

0 = IRQ is not generated

PEND2: Pending Conversion Status 2 bit(2)

1 = Conversion of channels AN5 and AN4 is pending; set when selected trigger is asserted.

0 = Conversion is complete

SWTRG2: Software Trigger 2 bit(2)

1 = Start conversion of AN5 and AN4 (if selected by TRGSRC bits)(3)

This bit is automatically cleared by hardware when the PEND2 bit is set.

0 = Conversion is not started

Note 1: These bits are available in the dsPIC33FJ16GS402/404, dsPIC33FJ16GS504, dsPIC33FJ16GS502 and

dsPIC33FJ06GS101 devices only.

2: These bits are available in the dsPIC33FJ16GS502, dsPIC33FJ16GS504, dsPIC33FJ06GS102,

dsPIC33FJ06GS202 and dsPIC33FJ16GS402/404 devices only.

3: If other conversions are in progress, then conversion will be performed when the conversion resources are

available.

DS70318D-page 252

Preliminary

© 2009 Microchip Technology Inc.

Share Link: