M24M01-RMN6P(2012) View Datasheet(PDF) - STMicroelectronics
Part Name
Description
Manufacturer
M24M01-RMN6P Datasheet PDF : 38 Pages
| |||
DC and AC parameters
M24M01-R M24M01-DF
.
Table 12. DC characteristics (M24M01-R, device grade 6)
Symbol
Parameter
Test conditions (in addition to
those in Table 6)
Min.
ILI
Input leakage current
(E1, E2, SCL, SDA)
VIN = VSS or VCC
device in Standby mode
ILO
Output leakage current
SDA in Hi-Z, external voltage
applied on SDA: VSS or VCC
VCC = 1.8 V, fc= 400 kHz
Max. Unit
±2
µA
±2
µA
1(1)
mA
VCC = 2.5 V, fc =400 kHz
ICC Supply current (Read)
VCC = 5.5 V, fc =400 kHz
1
mA
1.5(2) mA
fc= 1 MHz
1.5(3) mA
ICC0 Supply current (Write) During tW
2(4)(5) mA
Device not selected,
VIN = VSS or VCC, VCC = 1.8 V
3(6)
µA
ICC1
Standby supply current
Device not selected,
VIN = VSS or VCC, VCC = 2.5 V
3(7)
µA
Device not selected,
VIN = VSS or VCC, VCC = 5.5 V
5(8)
µA
VIL
Input low voltage
(SCL, SDA, WC)
1.8 V ≤ VCC < 2.5 V
2.5 V ≤ VCC < 5.5 V
–0.45 0.25 VCC V
–0.45 0.30 VCC V
VIH
Input high voltage
(SCL, SDA)
1.8 V ≤ VCC < 2.5 V
2.5 V ≤ VCC < 5.5 V
0.75 VCC VCC+1 v
0.70 VCC 0 VCC+1 v
IOL = 1.0 mA, VCC = 1.8 V
0.2
V
VOL Output low voltage
IOL = 2.1 mA, VCC = 2.5 V
0.4
V
IOL = 3.0 mA, VCC = 5.5 V
0.4
V
1. Devices identified by process letter A or B offer ICC = 0.8 mA
2. The previous product identified by process letter A or B was specified with Icc(max) = 2 mA.
3. Devices identified by process letter A or B offer ICC = 2.5 mA.
4. Characterized only, not tested in production.
5. The previous product identified by process letter A or B was characterized with Icc0(max) = 5 mA.
6. Devices identified by process letter A or B offer ICC1 = 1 µA.
7. Devices identified by process letter A or B offer ICC1 = 2 µA.
8. Devices identified by process letter A or B offer ICC1 = 3 µA.
26/38
Doc ID 12943 Rev 10
Share Link: 