C8051F045 查看數據表（PDF） - Silicon Laboratories
零件编号
产品描述 (功能)
生产厂家
C8051F045 Datasheet PDF : 328 Pages
| |||
C8051F040/1/2/3/4/5/6/7
SFR Definition 17.8. P1MDIN: Port1 Input Mode
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
11111111
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
SFR Address: 0xAD
SFR Page: F
Bits7-0:
P1MDIN.[7:0]: Port 1 Input Mode Bits.
0: Port Pin is configured in Analog Input mode. The digital input path is disabled (a read from
the Port bit will always return ‘0’). The weak pullup on the pin is disabled.
1: Port Pin is configured in Digital Input mode. A read from the Port bit will return the logic
level at the Pin. The state of the weak pullup is determined by the WEAKPUD bit (XBR2.7,
see SFR Definition 17.3).
SFR Definition 17.9. P1MDOUT: Port1 Output Mode
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
00000000
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
SFR Address: 0xA5
SFR Page: F
Bits7-0: P1MDOUT.[7:0]: Port1 Output Mode Bits.
0: Port Pin output mode is configured as Open-Drain.
1: Port Pin output mode is configured as Push-Pull.
Note:
SDA, SCL, and RX0 (when UART0 is in Mode 0) and RX1 (when UART1 is in Mode 0) are
always configured as Open-Drain when they appear on Port pins.
Rev. 1.5
217
Share Link: 