Table 106 - Auxilliary I/O, Logical Device 8 [Logical Device Number = 0x08]
NAME
REG INDEX
DEFINITION
STATE
GP_INT1
0xF0 General Purpose I/O Combined Interrupt 1
C
Bit[2:0] Reserved, = 000
Default = 0x00
Bit[3] GP IRQ Filter Select
on VTR POR
0 = Debounce Filter Bypassed
1 = Debounce Filter Enabled
Bit[7:4] Combined IRQ mapping
1111 = IRQ15
.........
0011 = IRQ3
0010 = Invalid
0001 = IRQ1
0000 = Disable
GPA_GPW_EN
0xF1 General Purpose Read/Write Enable
C
Bit[0] =1 enable GP Address Decoder
Default = 0x00
=0 disable GPA Address Decoder.
on VCC POR or
Bit[1] =1 enable GPW, =0 disable GPW
Reset_Drv
Bit[6:2] Reserved, = 00000
Bit[7] WDT Time-out Value Units Select
= 0 Minutes (default)
= 1 Seconds
WDT_VAL
Default = 0x00
on VCC POR or
Reset_Drv
Note: If the logical device's activate bit is not set then
bits 0 and 1 have no effect.
0xF2 Watch-dog Timer Timeout Value
C
Binary coded, units = minutes (default) or seconds,
selectable via Bit[7] of Reg 0xF1, Logical Device 8.
0x00 Timeout disabled
0x01 Timeout = 1 minute (second)
.........
0xFF Timeout = 255 minutes (seconds)
234