M25PE80-VMN6TP View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

M25PE80-VMN6TP

8 Mbit, low-voltage, Page-Erasable Serial Flash memory with byte alterability, 50 MHz SPI bus, standard pinout

STMicroelectronics 

M25PE80

9

Initial delivery state

Initial delivery state

The device is delivered with the memory array erased: all bits are set to 1 (each Byte

contains FFh). All usable Status Register bits are 0.

10 Maximum rating

Stressing the device above the rating listed in the Absolute Maximum Ratings table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the Operating sections of

this specification is not implied. Exposure to Absolute Maximum Rating conditions for

extended periods may affect device reliability. Refer also to the STMicroelectronics SURE

Program and other relevant quality documents.

Table 16. Absolute maximum ratings

Symbol

Parameter

Min. Max. Unit

TSTG

TLEAD

VIO

Storage Temperature

Lead temperature during soldering

Input and Output Voltage (with respect to Ground)

–65 150

°C

See (1)

–0.6

VCC +

0.6

V

VCC

Supply Voltage

–0.6 4.0

V

VESD Electrostatic Discharge Voltage (Human Body model)(2) –2000 2000

V

1. Compliant with JEDEC Std J-STD-020C (for small body, SnPb or Pb assembly), the ST ECOPACK®

7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)

2002/95/EU.

2. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω).

47/61

Share Link: