M69KB096AB View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

M69KB096AB

64 Mbit (4Mb x 16)/ 104MHz Clock Rate 1.8V Supply - Bare Die Burst PSRAM

STMicroelectronics 

9 DC and AC parameters

M69KB096AB

Figure 31. Synchronous Burst Write Followed by Read AC Waveforms (4 Words)

1. The Latency type can set to fixed or variable mode. The Latency is set to 3 clock cycles (BCR13-BCR11 = 101). The WAIT

signal is active Low (BCR10=0), and is asserted during delay (BCR8=0).

2. E can remain Low between the Burst Read and Burst Write operation, but it must not be held Low for longer than tELEH.

62/73

Share Link: