MCP4014-502E/CH View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
MCP4014-502E/CH Datasheet PDF : 60 Pages
| |||
MCP4011/2/3/4
5.2.6
HIGH-VOLTAGE INCREMENT 2
(FOR MCP402X COMPATIBILITY)
Note:
This command allows compatibility with
the MCP402X family, which supports
updating of the non-volatile wiper setting
with the WiperLock Technology feature.
This mode is achieved by initializing the U/D pin to a
high state (VIH) prior to the CS pin being driven to VIHH.
Subsequent rising edges of the U/D pin increment the
wiper setting toward terminal A. Set the U/D pin to the
low state (VIL) prior to forcing the CS pin to VIH. This is
shown in Figure 5-6.
After the CS pin is driven to VIH (from VIL), any other
serial command may immediately be entered.
Note:
The wiper value will not overflow. That is,
once the wiper value equals 0x3F,
subsequent increment commands are
ignored.
VIHH
VIH
CS
U/D
Wiper
VIH
1
2
3
4
VIL
X
X+1 X+2
X+3 X+4
5
6
VIH
VIL
FIGURE 5-6:
High-Voltage Increment 2 (For MCP402X Compatibility).
© 2006 Microchip Technology Inc.
DS21978C-page 35
Share Link: 