MCP4014-502E/CH View Datasheet(PDF) - Microchip Technology
Part Name
Description
Manufacturer
MCP4014-502E/CH Datasheet PDF : 60 Pages
| |||
MCP4011/2/3/4
5.2.8
HIGH-VOLTAGE DECREMENT 2
(FOR MCP402X COMPATIBILITY)
Note:
This command allows compatibility with
the MCP402X family, which supports
updating of the non-volatile wiper setting
with the WiperLock Technology feature.
This mode is achieved by initializing the U/D pin to the
low state (VIL) prior to driving the CS pin to VIHH.
Subsequent rising edges of the U/D pin decrement the
wiper setting toward terminal B. Set the U/D pin to a
high state (VIH) prior to forcing the CS pin to VIH. This
is shown in Figure 5-8.
After the CS pin is driven to VIH (from VIL), any other
serial command may immediately be entered.
Note:
The wiper value will not underflow. That is,
once the wiper value equals 0x00,
subsequent decrement commands are
ignored.
VIHH
VIH
CS
U/D VIL
Wiper
1
2
3
4
X X-1 X-2 X-3 X-4
VIH
VDD 5
6 VIH
FIGURE 5-8:
High-Voltage Decrement 2 (For MCP402X Compatibility).
© 2006 Microchip Technology Inc.
DS21978C-page 37
Share Link: 