STM8S007C8T6TR(2015) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

STM8S007C8T6TR
(Rev.:2015)

Value line, 24 MHz STM8S 8-bit MCU, 64 Kbytes Flash, true data EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C

STMicroelectronics 

Electrical characteristics

STM8S007C8

9.3.1

VCAP external capacitor

Stabilization for the main regulator is achieved connecting an external capacitor CEXT to the

VCAP pin. CEXT is specified in Table 16. Care should be taken to limit the series inductance

to less than 15 nH.

Figure 9. External capacitor CEXT

ESR

C

ESL

9.3.2

Rleak

1. Legend: ESR is the equivalent series resistance and ESL is the equivalent inductance.

Supply current characteristics

The current consumption is measured as described in Figure 5 on page 42.

Total current consumption in run mode

The MCU is placed under the following conditions:

 All I/O pins in input mode with a static value at VDD or VSS (no load)

 All peripherals are disabled (clock stopped by Peripheral Clock Gating registers)

except if explicitly mentioned.

 When the MCU is clocked at 24 MHz, TA  85 °C and the WAITSTATE option bit is set.

Subject to general operating conditions for VDD and TA.

48/92

DocID022171 Rev 5

Share Link: