STM8S005K6 STM8S005C6
Electrical characteristics
(1) Data based on characterization results, not tested in production.
(2) Configured by the REGAH bit in the CLK_ICKR register.
(3) Configured by the AHALT bit in the FLASH_CR1 register.
9.3.2.4
Total current consumption in halt mode
Table 25: Total current consumption in halt mode at VDD = 5 V
Symbol Parameter
Conditions
Typ Max at Unit
85 °C(1)
IDD(H)
Supply current in Flash in operating mode, HSI
62 90
µA
halt mode
clock after wakeup
Flash in powerdown mode, HSI 6.5 25
clock after wakeup
(1) Data based on characterization results, not tested in production.
Table 26: Total current consumption in halt mode at VDD = 3.3 V
Symbol Parameter
Conditions
Typ Max at Unit
85 °C(1)
IDD(H)
Supply current in Flash in operating mode, HSI 60 90
µA
halt mode
clock after wakeup
Flash in powerdown mode, HSI 4.5 20
clock after wakeup
(1) Data based on characterization results, not tested in production.
9.3.2.5 Low power mode wakeup times
Table 27: Wakeup times
Symbol Parameter
Conditions
Wakeup time from
tWU(WFI) wait mode to run
mode(3)
0 to 16 MHz
fCPU = fMASTER = 16 MHz
Typ Max(1) Unit
See
note(2)
μs
0.56
DocID022186 Rev 3
61/103