ST72361J4-AUTO View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

ST72361J4-AUTO

8-bit MCU for automotive with Flash or ROM, 10-bit ADC, 5 timers, SPI, LINSCI™

STMicroelectronics 

ST72361xx-Auto

Electrical characteristics

19.4.2

Table 92. Clock source current consumption

Symbol

Parameter

Conditions

Typ

Max(1) Unit

IDD(RES)

Supply current of resonator

oscillator(2)(3)

IDD(PLL) PLL supply current

VDD = 5V

See Section 20.5.1: Crystal

and ceramic resonator

oscillators

µA

360

IDD(LVD) LVD supply current

HALT mode, VDD = 5V

150

300

1. Data based on characterization results, not tested in production.

2. Data based on characterization results done with the external components specified in Section 20.5.1:

Crystal and ceramic resonator oscillators, not tested in production.

3. As the oscillator is based on a current source, the consumption does not depend on the voltage.

On-chip peripherals

TA = 25°C, fCPU = 8 MHz

.

Table 93. Peripheral consumption

Symbol

Parameter

Conditions

Typ Unit

IDD(TIM) 16-bit timer supply current(1)

IDD(TIM8) 8-bit timer supply current(1)

IDD(ART) ART PWM supply current(2)

IDD(SPI) SPI supply current(3)

IDD(SCI) SCI supply current(4)

IDD(ADC) ADC supply current when converting(5)

50

75

µA

VDD  5.0V

400

1. Data based on a differential IDD measurement between reset configuration (timer counter running at

fCPU/4) and timer counter stopped (only TIMD bit set). Data valid for one timer.

2. Data based on a differential IDD measurement between reset configuration (timer stopped) and timer

counter enabled (only TCE bit set).

3. Data based on a differential IDD measurement between reset configuration (SPI disabled) and a permanent

SPI master communication at maximum speed (data sent equal to 55h).This measurement includes the

pad toggling consumption.

4. Data based on a differential IDD measurement between SCI low power state (SCID = 1) and a permanent

SCI data transmit sequence. Data valid for one SCI.

5. Data based on a differential IDD measurement between reset configuration and continuous A/D

conversions.

Doc ID 12468 Rev 3

233/279

Share Link: