DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

CL-PS7500FE 查看數據表(PDF) - Cirrus Logic

零件编号
产品描述 (功能)
生产厂家
CL-PS7500FE Datasheet PDF : 251 Pages
First Prev 141 142 143 144 145 146 147 148 149 150 Next Last
CL-PS7500FE
System-on-a-Chip for Internet Appliance
16.13 Horizontal Cursor Start Register (HCSR): Address 0x86
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1000 0110
XXXXXXXXXXXXX
HCSR value
This register defines the time, in pixels, from the start of the HSYNC pulse to the start of the cursor display.
This is a 14-bit register where all bits can be programmed. If N pixels are required in this time, then pro-
gram the value (N 17) into the HCSR. The cursor can thus be programmed to start on any pixel. In HiRes
mode, the cursor can still only be programmed to start on a normal pixel boundary. However, because the
resolution of the cursor can be defined to a µ-pixel, by using different cursor images it is possible to posi-
tion the cursor to any µ-pixel.
NOTE: Only the cursor start position needs to be defined, as the cursor is automatically disabled after 32 pixels in
normal mode or 16 pixels in HiRes mode. If a smaller cursor is required, program the remaining bits in the
cursor pattern to logical color ‘00’ (transparent).
16.14 Horizontal Interlace Register (HIR): Address 0x87
Address 87H is reserved. Do not program this register.
16.15 Horizontal Test Registers: Addresses 0x88 and 0x8H
These two registers are provided for test purposes only. Neither of these registers are intended for use
during normal operation.
16.16 Vertical Cycle Register (VCR): Address 0x90
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
1 0 01 0 0 00
X X X X X X X X X X X XX
VCR value
This 13-bit register defines the period, in units of a raster, of the ver tical scan (that is,
display time + FLYBACK time). If N rasters are required in a complete frame, then value (N 2) should be
programmed into the VCR. If an interlaced display is selected, (N 3) ÷ 2 must be programmed into the
VCR (N must be odd.) Here N is still the number of rasters in a complete frame, not a field.
June 1997
ADVANCE DATA BOOK v2.0
THE VIDEO SOUND AND PROGRAMMER’S MODEL
147

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]