DA28F320S5-110 View Datasheet(PDF) - Intel

Part Name

Description

Manufacturer

DA28F320S5-110

WORD-WIDE FlashFile™ MEMORY FAMILY

Intel 

E

28F160S5, 28F320S5

6.0 ELECTRICAL SPECIFICATIONS

6.1 Absolute Maximum Ratings

Temperature under Bias ................ –40°C to +85°C

Storage Temperature................... –65°C to +125°C

Voltage On Any Pin

(except VCC and VPP )

.................................... –0.5V to + VCC +0.5V(1)

VCC Supply Voltage ............ –0.2V to + VCC+0.5V(1)

VPP Update Voltage during

Block Erase, Flash Write, and

Lock-Bit Configuration ........... –0.2V to +7.0V(2)

Output Short Circuit Current.....................100 mA(3)

NOTICE: This datasheet contains information on products

in the design phase of development. Do not finalize a

design with this information. Revised information will be

published when the product is available. Verify with your

local Intel Sales office that you have the latest datasheet

before finalizing a design

*WARNING: Stressing the device beyond the “Absolute

Maximum Ratings” may cause permanent damage. These

are stress ratings only. Operation beyond the “Operating

Conditions” is not recommended and extended exposure

beyond the “Operating Conditions” may affect device

reliability.

NOTES:

1. All specified voltages are with respect to GND. Minimum

DC voltage is –0.5V on input/output pins and –0.2V on

VCC and VPP pins. During transitions, this level may

undershoot to –2.0V for periods <20 ns. Maximum DC

voltage on input/output pins and VCC is VCC +0.5V

which, during transitions, may overshoot to VCC +2.0V

for periods <20 ns.

2. Maximum DC voltage on VPP may overshoot to +7.0V

for periods <20 ns.

3. Output shorted for no more than one second. No more

than one output shorted at a time.

4. Operating temperature is for extended product defined

by this specification.

6.2 Operating Conditions

Symbol

Table 17. Temperature and VCC Operating Conditions (1)

Parameter

Notes Min Max Unit

Test Condition

TA

Operating Temperature

-40 +85 °C Ambient Temperature

VCC1

VCC Supply Voltage (5V ± 5%)

4.75 5.25

V

VCC2

VCC Supply Voltage (5V ± 10%)

4.50 5.50

V

NOTES:

1. Device operations in the VCC voltage ranges not covered in the table produce spurious results and should not be

attempted.

ADVANCE INFORMATION

39

Share Link: